m3 drive train into 325is - BimmerPages.com

You are currently viewing Bimmer Pages as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

		BimmerPages.com > BMW Model Specific Discussions > 3 Series > 3 Series (E46)
m3 drive train into 325is

LinkBack

Thread Tools

Display Modes

#1 (permalink)

02-27-2008, 06:42 PM

mattgros325is mattgros325is is offline

Pages Newbie

Join Date: Feb 2008

Posts: 2

Rep Power: 0

mattgros325is is on a distinguished road

m3 drive train into 325is

i have a 93 325is... im doing the m3 drive train swap. I have the engine and trans in and mounted in the car..and running. I put the m3 diff in and attached to the m3 drive shaft, however the stock 325 axles do not bolt up to the m3 diff. Does anyone know if i can swap the flanges on the diff to use the stock axles, or will i have to swap over the to the m3 axles and hubs. does anyone know anybody that have done a swap like this?? I dont feel like swaping the hole sub frame just for the axles... thanks

« E36 sound clip thread | newbie here »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

All times are GMT -4. The time now is 02:21 PM.